Conveyor Belt with Leaves Remover

The Olive Conveyor Belt performs the duty of removing the leaves from the olives and transfer the olives to the washing section in the olive oil plant. It is equipped with a hopper in which the olives are poured, a belt mounted frame which carries the olives to the washing section and a defoliator. All of them are made of stainless steel. Hopper has a special geometry that prevents the accumulation of olives. The material of the belt is made of rubber in accordance with international food regulations. A special brush is coupled to the belt frame which provides automatic cleaning of the belt and increases its life, especially by cleaning the sludge that comes with extremely dirty olives.

WORKING PRINCIPLE

Olives arriving to the plant are poured into the hopper. The adjustable speed conveyor transfers the olives to the washing section. The defoliator mounted on the belt frame ensures complete or partial removal of leaves and other light foreign objects. Suction power of defoliator is adjustable. The control of the Olive Conveyor Belt is on a common panel with the washing machine.

BKP-220

TECHNICAL SPECS
INSTALLED MOTOR POWER 0,8 kW
DIMENSIONS (Length * Width, Height) 2850x345, 260mm
WEIGHT 220 kg

BKP-321

TECHNICAL SPECS
INSTALLED MOTOR POWER 1,1 kW
DIMENSIONS (Length * Width, Height) 3620x530, 350mm
WEIGHT 380 kg

BKP-521

TECHNICAL SPECS
INSTALLED MOTOR POWER 1,1 kW
DIMENSIONS (Length * Width, Height) 5860x530, 350mm
WEIGHT 420 kg

BKP-821

TECHNICAL SPECS
INSTALLED MOTOR POWER 1,5 kW
DIMENSIONS (Length * Width, Height) 7850x530, 350mm
WEIGHT 600 kg
*HAUS, reserves the right to modify the specifications herein at anytime without prior notice.