Plastic corrugated plate packing

Plastic Corrugated Plate Packing

Plastic corrugated plate packing The angle of the corrugation of the adjacent sheet is rotated to the axis of the vertical column, forming a link at each point where the corrugation intersects. The structural packing can be made of many metals. Examples of possible metals are: Stainless steels, high-Alloy steels, duplex steels, Nickel and Nickel alloys, Copper, Aluminum, Titanium, and Zirconium. Welded batch construction. Easy handling due to the fact that the parts and individual elements of the packing are welded together (instead of ties). A wide range of work performance. Flexible performance work so that the minimum performance is limited only by the design of the liquid distributor. Low liquid retention capacity. Wall flow pockets are provided with each element. Reduction of time of stay of the liquid, which minimizes the decomposition of the product. As a rule, it is one-eighth of the holding capacity of the liquid compared to the tray column. Reducing to a minimum the transmission of vapors and liquids in the near-wall zone to maximize separation efficiency.

Size, mm Specific surface area, m2/m3 Pore volume, % The number of PCs/m3 Density, kg / m3 Current quantity, PCs / m3
125Y 125 98 1-2 / 200
250Y 250 97 2-2.5 / 300
350Y 350 94 3.5-4 / 200
500Y 500 92 4-4.5 / 300
125X 125 98 0.8-1.9 / 140
250X 250 97 1.5-2 / 180
350X 350 94 2.3-2.8 / 130
500X 500 92 2.8-3.2 / 180