eCONTROL 2 pH / RedOx / Chlorine / PPM Controller

ECONTROL 2 controller for measuring and controlling pH, Rx (ORP), chlorine CL, PPM.

eCONTROL 2 controller for measuring and monitoring electrochemical parameters: pH, RedOx (ORP), free and total organic or inorganic chlorine CL, as well as other parameters determined by ion-selective sensors (ppm).

TECHNICAL SPECIFICATIONS

  • Microprocessor control.
  • Informative backlit LCD
  • Measuring ranges: 0-14 pH ; -1000 +1400 mV ; chlorine : 0-2 mg / l, 0-20 mg / l, 0-200 mg / l; ppm : 0-2 ppm, 0-20 ppm, 0-200 ppm; 0-100 ° C .
  • Setting 2 independent Setpoints on the measured parameter
  • Dosing control modes: constant ON / OFF with hysteresis or proportional to PROP.
  • Direction of dosage regimen selection: direct or reverse
  • Setting the start delay time for metering pumps
  • 2 independent proportional ON / OFF outputs (proximity switch) with PWM mode
  • PT100 temperature sensor support.
  • Manual (25 ° C) or automatic temperature compensation (when a PT100 temperature sensor is connected)
  • Alarm MAX. reagent concentration (optional)
  • Alarm MIN. reagent concentration (optional)
  • Alarm on the time of continuous dosing and not reaching the Setpoint (optional)
  • ON / OFF output (proximity switch) for alarm (optional)
  • 4-20 mA output (optional)
  • Galvanically isolated outputs
  • Universal input voltage: 100-250V AC 50 Hz.
  • Dust and moisture protection class: IP65.
  • Wall mount.
  • External dimensions: 200x131x88 mm.
Name Feature Article Price without VAT, (€)
eCONTROL 2 Liquid Analyzers pH-Rx - pH-CL CXB7000201 563

EXTERNAL DIMENSIONS

External dimensions