DLXB PH-RX / MBB solenoid pumps with pH / Rx controller
- Productivity: 1 ÷ 20 l/hr.
- Pressure: 2 ÷ 10 bar.
Solenoid pumps DLXB PH-RX/MBB is a microprocessor-based metering device with an integrated controller of indicators pH (acid/alkaline balance) and RedOx (oxidation/reduction potential ) .
DLXB PH-RX/MBB solenoid pumps are used to dispense liquid reagents, it monitors and regulates the pH level and RedOx liquid . Measurement ranges of pH 0-14 with a resolution of 0.01 pH, RedOx from -1000 to +1400 mV with a resolution of 1 mV.
DLXB PH-RX/MBB solenoid pumps, before setting the operating mode, select one of the measured pH or RedOx values, program the installation point (digital value of the measured level) and the dosing direction (more/less relative to the installation point).
- Manual . Permanent « ON-OFF » ;. In this mode, the performance is set in the range from 0 to 100%. The pump will dispense at the set capacity and will stop when the set point is reached.
- Proportional « PROP » . In PROP mode. sets the point of maximum performance in the range from 0 to 100%. The pump will run at maximum frequency until this point is reached, after which it will start proportional dosing. The processor will automatically monitor performance and stop the pump at the installation point. When the level differs from the installation point, the pump will start dosing again.
- Proportional metering pump with integrated pH/RedOx controller (optional).
- Dosing modes: proportional to PROP. or permanent ON/OFF.
- Measuring ranges: 0-14 pH; -1000 + 1400 mV.
- Backlit LCD.
- Three status indicators.
- 4 touch buttons for selecting pump operating modes.
- Simplified user menu.
- Delay in starting the pump.
- Support for flow and level sensors (sensors not included).
External dimensions DLXB PH-RX/MBB
DLXB PH-RX/MBB Performance Charts
|Type||Consumption||Pressure||Code|| Price without VAT, (€)
- 120V - +10%
- R/C - +60 euro
The dispenser is made in a polypropylene casing, degree of protection IP65 (dust, splashes). New sample dispenser head with manual air bleed valve.
Appearance of DLXB PH-RX/MBB pump control panels
DLXB PH-RX/MBB Options
Each DLXB PH-RX/MBB pump comes standard with:
- Dosing pump (1 pc.).
- Intake hose (2 meters).
- Discharge hose (2 meters).
- Intake valve (1 pc.).
- Injection valve (1 pc.).
- Passport instruction (1 pc.).