eONE GUARD dosing and control system for PH, Rx and CL chlorine levels

Professional dosing and control system eONE GUARD TOUCH.

eONE GUARD TOUCH PH / RX / CL / T PANEL (SONDA CL) is a professional automatic dosing and control system for the levels of PH, RedOx and CL (concentration of free chlorine in water) for swimming pools.

The dosing system is controlled by the fluid flow sensor, in the absence of flow the system goes into standby mode. The new generation eSELECT-B4 controller with a color 7 "LCD touch screen, electronic magazine, easily accessible flow-through piping for servicing.

  • Productivity: pH - 6 l / h; CL - 15 l / hr.
  • Back pressure: pH - 7 bar; CL - 5 bar.

TECHNICAL DATA:

  • The system is based on the new generation eSELECT B4 controller, with three independent pH / RX / Cl parameters, with a universal input voltage of 90-260V; eONE MF series proportional metering pumps and SONDA CL potentiostatic free chlorine sensor.
  • Dosing delay when the system is turned on.
  • Level sensor or flow sensor alarm.
  • Alarm settings for pH / Cl (MIN / MAX) concentration limits.
  • Dosage regimen: proportional to PROP.
  • PT100 temperature sensor support.
  • Automatic pH temperature compensation.
  • Pump productivity: PH: 6 l / h; Cl: 15 l / h.
  • Measuring ranges: 0-14 pH; -1000 + 1400 mV;
    chlorine 0-2 or 0-20 ppm (mg / l), 0-100 ° C.
  • Display Resolution: 0.01 pH; 1 mV; 0.01 ppm; 0.1 ° C.
  • Two independent outputs ON / OFF (proximity switch) for each measured parameter.
  • Two independent 4-20 mA outputs per Set Point.
  • Electronic clock (time, date), timer.
  • Electronic blocking of the settings made.
  • Three programmable ON / OFF (contactless relay) outputs for connecting a pump for dosing of flocculant or installation of « shock » chlorination timer.
  • Alarm ON / OFF (proximity switch) output.
  • Built-in electronic logbook of changes in measured parameters.
  • USB port for updating software and uploading data.
  • RJ45 Ethernet (LAN) input for connecting to a network.
  • RS485 output.
  • Monitoring system status over the Internet.
  • Dust and moisture protection class of the controller and pumps: IP65.

DOSING SYSTEM CONFIGURATION: (SONDA CL) - configuration with potentiostatic free chlorine sensor SONDA CL (organic / inorganic chlorine).

Composition of the dosing system eONE GUARD TOUCH PH / RX / CL / T (SONDA CL)

1 pc. - pump eONE MF 6-7 100 / 250V PVDF.
1 pc. - pump eONE MF 15-5 100 / 250V PVDF.
1 pc. - liquid analyzer eSELECT-B4 100-250V.
1 pc. - SONDA CL chlorine sensor, FIC / FOC, 0-20 (0-2) mg / l.
1 pc. - connecting cable for SONDA CL.
2 pcs. - reagent injection valve.
2 pcs. - reagent intake valve.
1 pc. - PH level sensor with 0.5 m cable.
1 pc. - RX level sensor with 0.5 m cable.
1 pc. - temperature sensor PT100, GLASS.
2 pcs. - reagent level sensor with 2 m cable.
1 pc. - sensor holder PH-RX-CL (FS) with mounting kit.
1 pc. - calibration solution PH 7, 55 ml.
1 pc. - calibration solution PH 9, 55 ml.
1 pc. - calibration solution 650 mV, 55 ml.
2 pcs. - reagent intake hose, 4x6, PVC, 2 mp.
2 pcs. - reagent discharge hose, 4x6, PE, 2 m.p.
1 pc. - mounting plate 900x600x8 mm.

Type Consumption
l / hour
Pressure
bar
Code Price without VAT, (€)
eONE GUARD TOUCH 6
15
7
5
QPA8K11338ER 5029
QPA8K11238ER 4866