Automatic control and dosing station PH and RX - POOL GUARD 1 PH / RX

Automatic station of control and dispensing of PH and RX.

POOL GUARD 1 PH / RX - an automatic proportional dosing and control system for PH and RX levels (RedOx - redox potential) for swimming pools up to 500 m 3 .

The dosing station is controlled by a liquid flow sensor (included), in the absence of flow the system goes into standby mode.

Automatic monitoring and dosing station Pool Guard 1 PH / RX - provides water treatment for the pool by: measuring and regulating the redox potential (RX) - dosing of chlorine; measuring and regulating the pH value; measurement of water flow to disable outputs in the absence of flow.

The dosing system POOL GUARD 1 PH / RX is supplied mounted on a chemical-resistant plastic panel (450x600x8 mm), in a complete set, ready for installation and commissioning. All main probes and sensors are installed in the flow cell.

TECHNICAL DATA:

  • The system is based on DLX PH-RX / MBB metering pumps with optional pH / RedOx controllers.
  • Alarm on the time of continuous dosing, followed by shutdown of the dosing pumps.
  • Dosing delay when the system is turned on.
  • Alarm of the level sensor (flow sensor).
  • Alarm settings for reagent concentration limits (MIN / MAX levels).
  • Dosing modes: constant ON / OFF and proportional PROP.
  • Set hysteresis.
  • Pump productivity: 5 l / h - 7 bar.
  • Measuring ranges: 0-14 pH; -1000 +1400 mV RedOx.
  • Dust and moisture protection class of pumps: IP65.
  • Support for flow sensors and reagent level.

Measurement ranges, controlled characteristics of Pool Guard 1 PH / RX:

Measured parameter Measurement range Accuracy
pH 0 … 14 pH 0.01
RX - 1000 +1400 mV 1.0

Built-in functions:

  • Alarm on the time of continuous dosing, followed by shutdown of the dosing pumps.
  • Dosing delay when turning on the station.
  • Alarm and shutdown of the station by the level sensors (included) of the reagent in the tanks.
  • Alarm settings for chemical limits reagents (MIN / MAX levels).
  • Dosing modes: constant "ON / OFF" and proportional to "PROP".
  • Set hysteresis.
  • The dosing station is controlled by a liquid flow sensor (included), if there is no flow, the system goes into standby mode « STAND BY », with subsequent indication on the LCD displays of the pumps.

Inputs / Exits :

- pH / RX inputs - BNC connectors, input impedance > 10 ^ 12 Ω.
- 2 inputs "LEV" for level sensor SPDT pin 5 V / 5 mA.
- Input "FLOW" for connection with a pump relay or flow sensor (SPDT pin 5 V / 5 mA).
- Optional outputs: alarm relay and RS232 serial port.

Composition of the dosing system POOL GUARD 1 PH / RX

2 pcs. - DLX pump PH-RX / MBB 5-7 230V
1 pc. - PH level sensor with 5 m cable.
1 pc. - RX level sensor with 5 m cable.
2 pcs. - reagent level sensor with 2 m cable.
1 pc. - filtering device KIT -PH / RX
1 pc. - set of installation and maintenance instructions
1 pc. - calibration solution PH 7, 55ML
1 pc. - calibration solution PH 9, 55ML
1 pc. - calibration solution RX 475 mV, 55ML
2 pcs. - reagent injection valve
2 pcs. - reagent intake filter
2 pcs. - reagent intake hose, 4x6, PVC, 2 mp
2 pcs - reagent discharge hose, 4x6, PE, 2 mp

Type Performance,
l / h
Pressure,
bar
pH RX Price without VAT, (€)
POOL GUARD 1 PH / RX 5 7 0 … 14 - 1000 +1400 1499