Monitoring and control system PH-CL-F CONTROL PANEL

Control and regulation system PH-CL-F CONTROL PANEL.

PH-CL-F CONTROL PANEL - a pre-installed system for regulating and controlling the pH level and the level of free (residual) chlorine in the water for swimming pools. The dosing control and management system is supplied pre-mounted on a plastic chemically resistant panel (400x600x8 mm), without dosing pumps (pumps and (or) other execution devices are selected according to the technical specifications).

The system is based on the eSELECT-B2 liquid analyzer, with a universal input voltage of 90-260V, a flow-through potentiostatic free chlorine sensor SONDA CL (organic / inorganic chlorine), a pH sensor and a sensor holder PH-CL (FS) with mounting kit including flow sensor.

Measuring ranges: 0-14 pH; 0-2 (20) ppm (mg / L). Display Resolution: 0.01 pH; 0.01 ppm. Dosing modes: continuous ON / OFF or proportional PROP.

Two independent outputs ON / OFF (proximity switch) for each measured parameter. Two independent 4-20 mA outputs per Set Point. Electronic clock (time, date), timer.

The SONDA CL sensor operates in the range of 4-12 pH and is compatible with the presence of isocyanuric acid, surfactants and flocculants in water, subject to a constant flow of 30-40 l / h (through the sensor holder), MAX temperature 45 ° C and MAX working back pressure in the system - 1 bar.

The SONDA CL sensor has an integrated automatic temperature compensation system.

Protection class: IP65. Pre-installed wiring (in the box) for connecting 2 ON-OFF external devices (for example, metering pumps).


1 pc. - liquid analyzer eSELECT-B2 230V
1 pc. - chlorine sensor SONDA CL, FIC / FOC, 0-20 (0-2) ppm
1 pc. - PH level sensor with 0.5 m cable.
1 pc. - sensor holder PH-CL (FS) with mounting kit
1 pc. - connecting cable for SONDA CL
1 pc. - calibration solution PH 7.55ML
1 pc. - calibration solution PH 9.55ML
1 pc. - mounting plate 450x600x8 mm