Monitoring and control system for PH, RX and free chlorine levels PH-RX-CL-F CONTROL PANEL

Regulation and control system for PH, RedOx and free chlorine levels in water for swimming pools PH-RX-CL-F CONTROL PANEL.

PH-RX-CL-F CONTROL - pre-installed system for regulating and controlling PH, RedOx and free (residual) chlorine levels in water for swimming pools, complete with eSELECT-B3 fluid analyzer. The control system is supplied pre-mounted on a plastic chemically resistant panel (400x600x8 mm), without metering pumps (pumps and (or) other executing devices are selected according to the technical specifications).

The system is based on the ESELECT-B3 liquid analyzer, with a universal input voltage of 90-260V, a flow potentiostatic free chlorine sensor SONDA CL (organic / inorganic chlorine), pH sensors, RedOx and a sensor holder PH-RX-CL (FS ) with mounting kit, including flow sensor.

Measuring ranges: 0-14 pH; -1000 + 1400 mV RedOx; 0-2 (20) ppm (mg / L). Display Resolution: 0.01 pH; 1 mV; 0.01 ppm. Dosing modes: continuous ON / OFF or proportional PROP.

Two independent outputs ON / OFF (proximity switch) for each measured parameter. Two independent 4-20 mA outputs per Set Point. Electronic clock (time, date), timer.

The SONDA CL sensor operates in the range of 4-12 pH and is compatible with the presence of isocyanuric acid in water, surfactants and flocculants, while maintaining a constant flow of 30-40 l / h (through the sensor holder), MAX temperature 45°C and MAX working pressure 1 bar.

The SONDA CL sensor has an integrated automatic temperature compensation system.

Protection class: IP65. Pre-installed wiring (in the box) for connecting 2 ON-OFF external devices (for example, metering pumps).

DOSING SYSTEM DELIVERY KIT

1 pc. - liquid analyzer eSELECT-B3 230V
1 pc. - chlorine sensor SONDA CL, FIC / FOC, 0-20 (0-2) ppm
1 pc. - PH level sensor with 0.5 m cable.
1 pc. - RX level sensor with 0.5 m cable.
1 pc. - sensor holder PH-RX-CL (FS) with mounting kit
1 pc. - connecting cable for SONDA CL
1 pc. - calibration solution PH 7.55ML
1 pc. - calibration solution PH 9.55ML
1 pc. - calibration solution 650 mV, 55ML
1 pc. - mounting plate 450x600x8 mm