Control system for monitoring the levels of PH, RX and residual chlorine CL (A) -PH-RX-F CONTROL
System for regulation and control of PH, RedOx and free chlorine levels in water for swimming pools CL (A) -PH-RX-F CONTROL PANEL.
CL (A) -PH-RX-F CONTROL is a pre-installed system for regulating and monitoring the levels of PH, RedOx and the level of free (residual) chlorine in water for swimming pools, complete with an eSELECT-B3 liquid analyzer. The control system is supplied pre-mounted on a plastic chemically resistant panel (400x600x8 mm), without metering pumps (pumps and (or) other executing devices are selected according to the technical specifications).
The system is based on the ESELECT-B3 fluid analyzer, with a universal input voltage of 90-260V, a flow-through amperometric free chlorine sensor SCLO 3 HYCHLOR (inorganic chlorine only), pH sensors, RedOx with a mounting kit, including a flow sensor.
Measuring ranges: 0-14 pH; -1000 + 1400 mV RedOx; 0-2 ppm (mg / L). Display Resolution: 0.01 pH; 1 mV; 0.01 ppm. Dosing modes: continuous ON / OFF or proportional PROP.
Dosing delay when the system is turned on. Level sensor or flow sensor alarm. Locking password settings.
Two independent outputs ON / OFF (proximity switch) for each measured parameter. Two independent 4-20 mA outputs per Set Point. Electronic clock (time, date), timer.
Electronic locking of the settings made with a password. Alarm settings for limit concentrations of pH / Cl (MIN / MAX).
Protection class: IP65. Pre-installed wiring (in the box) for connecting 2 ON-OFF external devices (for example, metering pumps).
DOSING SYSTEM DELIVERY KIT
1 pc. - ESELECT-B3 230V fluid analyzer
1 pc. - SCLO 3 chlorine sensor (HYCHLOR)
1 pc. - cable with adapter for SCLO 3 chlorine sensor (HYCHLOR)
1 pc. - mounting kit for SCLO 3 chlorine sensor (HYCHLOR)
1 pc. - mounting plate 450x600x8 mm
1 pc. - PH level sensor with 0.5 m cable.
1 pc. - RX level sensor with 0.5 m cable.
1 pc. - calibration solution PH 7.55ML
1 pc. - calibration solution PH 9.55ML
1 pc. - calibration solution 650 mV, 55ML