Pool chemistry dosing station - POOL GUARD MICRO PH / RX

Automatic station POOL GUARD MICRO PH / RX dosing chemistry for pools.

POOL GUARD MICRO pH / Rx - an automatic proportional dosing and control system for pH and Rx levels (RedOx - redox potential) for swimming pools, up to 200 m 3 .

BASIC ADVANTAGES: simplified programming procedure, interchangeability of peristaltic pumps, budget cost. The panel provides space for installing a flow-through pH-Rx (FS) sensor holder (optional). The POOL GUARD MICRO pH / Rx dosing system is supplied mounted on a chemically resistant plastic panel (450x600x8 mm), in a complete set, ready for installation and commissioning.

TECHNICAL DATA:

  • The system is based on an eCONTROL liquid analyzer with two parameters (pH / RedOx) and B3-V peristaltic pumps.
  • In proportional PROP mode. a new real-time microelectronic technology has been implemented: the frequency of turning on and off the metering pumps slows down as it approaches the set point in the range of 0-300 sec.
  • Dosing delay when the system is turned on
  • Level sensor or flow sensor alarm
  • Alarm settings according to concentration limits of measured parameters (MIN / MAX levels).
  • Alarm ON / OFF relay output for connecting external devices.
  • Dosage regimens: constant and proportional to PROP.
  • Set hysteresis, set dosing delay.
  • Pump productivity: 4 l / h - 3 bar.
  • Measuring ranges: 0-14 pH; -1000 +1400 mV RedOx.
  • Dust and moisture protection class of pumps: IP65.
  • Support for flow sensors and reagent level (not included).

Composition of the dosing system POOL GUARD MICRO PH / RX:

1 pc. - eCONTROL 2 100 / 250V liquid analyzer.
2 pc. - B3-V PER 4-3 90 / 260V SANT pump.
1 pc. - PH level sensor with cable 5 m.
1 pc. - RX level sensor with 5 m cable.
2 pc. - sensor holder (STD) 1/2 ", IN-LINE, PP.
4 pc .- clamp / valve holder, clamping DN50 - 1/2 ", PP.
2 pcs. - adapter nipple M1 / 2" - F3 / 8 ", PVC.
1 pc. - mounting plate 450x600x8 mm.
1 pc. calibration solution PH 7, 55ML.
1 pc. calibration solution PH 9, 55ML.
1 pc. calibration solution 650 mV, 55ML.
2 pc. .- reagent injection valve.
2 pcs. - reagent intake valve.
2 pcs. - reagent intake hose, 4x6, PVC, 2 mp.
2 pcs. - sbr hose sa reagent, 4x6, PE, 2 MP
1 sht.- set of instructions for installation and maintenance.

Type Performance,
l / h
Pressure,
bar
pH RX Price without VAT, (€)
POOL GUARD MICRO PH / RX 4 3 0 … 14 - 1000 +1400 1077